Chapter-5
Interface
USB-HID Basic Information
5.2.1
Basic information for USB-HID interface is as follows.
Required power supply
capacity
Differs from actual power
consumption.
Set when using NumLock/CapsLock
Initial value: No control
Use when outputting data with high speed.
Initial setting: 4 ms
(Setting range 1 ms-16 ms)
Data transmit interval
(Inter-character delay)
Use when data is missing.
Initial value: no interval
Suspend mode
Remote wakeup
Use when host system is using suspend.
Set according to the keyboard language.
Initial value: English (USA)
Set according to reading symbol encode
data.
Initial value: not use
character code
Set when outputting Chinese-character.
Initial value: output as it is
To Next Page
