Opticon NLV-5201 - Auto Trigger Sleep Mode; Read Time Adjustment

Chapter-8
Read Options
NLV-5201 User's Manual
88
1st
Read Time Adjustment
8.2.4
The time to end the auto trigger scanning can be adjusted.
Item
Command
Description
Default
Auto trigger read time
adjustment
[EFH
Long time
[EFI
Normal

[EFJ
Short time
*When the read time is fixed, please see: “Read Time”
Auto Trigger Sleep Mode 8.2.5
When nothing is detected after a specific configurable period while in auto trigger mode, the scanner
goes into sleep mode. The scanner performs presence detection at specified time intervals in sleep
mode and when a target is detected or any event such as trigger occurs, the unit exits from sleep
mode. Setting a time of 0 seconds means that sleep mode is disabled.
Item
Command
Description
Default
(valid range)
Auto trigger
sleep mode
[EBW
Qa
Qb
Qc
Qd
Transition time to sleep mode
(1000a+100b+10c+d) [s]
60 s
(0-9999)