Opticon NLV-5201 - Tuning; Execute Tuning

Chapter-7
Tuning and Bank Function
NLV-5201 User's Manual
78
1st
Tuning
7.2
Tuning can be excluded by command. The setting and output during tuning are as follows.
Execute Tuning 7.2.1
To start and stop tuning, use the settings below.
Item
Command
Description
Remark
Execute
Tuning
[DT1
Start tuning.
*1
[DT2
Stop in middle of tuning.
*2
*1. “Tuning complete” will be output when tuning successes, and after line brake, separate each output items with
“:” at tuning.
Tuning complete<CR>
Indicate tuning success and line brake.
BANK 1:CODETYPE QRCode:SHUTTER 177[us]:GAIN 648[%]:RATE 100[%]:TIME 25 - 26[ms]:123456789<CR>
Bank
No.
Code
Type
Shutter
Speed
Sensor
Gain
Read rate in
10 times
Min/Max of read
times in 10 times
Read
Data
Line
Break
*2. The output when tuning failed or stopped in middle.
Tuning failed<CR>
Indicate tuning failed or stopped and line break.