Opticon NLV-5201 - Status LED; Status LED Lighting Time

Chapter-4
Indicator Options
NLV-5201 User's Manual
43
1st
Status LED
4.2
Each status LED operation settings are described below.
Status LED Lighting Time 4.2.1
The status LED lights up after a code was successfully decoded and the data was output. This can be
disabled or set for several durations.
Item
Command
Description
Default
Status LED
T4
Disable indicator
[XT8
Indicator duration: 100 ms
T5
Indicator duration: 200 ms

T6
Indicator duration: 400 ms
T7
Indicator duration: 800 ms