Optimum OPTImill BF 20V - Glossary of symbols; Type plates

Version 4.0.2 dated 2019-4-3Page 6 Translation of the original instructions
BF20V | BF20L | BF20LDGB
BF20V_BF20L_BF20LD_GB_1.fm
OPTIMUM
MASCHINEN - GERMANY
®
1 Safety
Glossary of symbols
This part of the operating instructions
 explains the meaning and use of the warning notices included in these operating instruc-
tions,
 defines the intended use of the drilling-milling machine,
 points out the dangers that might arise for you or others if these instructions are not
observed,
 informs you about how to avoid dangers.
In addition to these operation instructions, please observe
 the applicable laws and regulations,
 the legal regulations for accident prevention,
 the prohibition, warning and mandatory signs as well as the warning labels on the drilling-
milling machine.
Always keep this documentation close to the drilling-milling machine.
INFORMATION
If you are unable to solve a problem using these operating instructions, please contact us for
advice:
Optimum Maschinen Germany GmbH
Dr. Robert-Pfleger-Str. 26
D- 96103 Hallstadt
email: info@optimum-maschinen.de
1.1 Type plates

gives further advice

calls on you to act

enumerations