Table 3-5 (Cont.) Administration Network Format Masks Page
Administration Network Format Masks
Field
Description
InfiniBand Spine Sets the administration name for the
InfiniBand spine switch in this rack.
Note:
The name contains alphanumeric characters.
InfiniBand Leaf Sets the administration name for the first
InfiniBand leaf switch in this rack.
Note:
The name contains alphanumeric characters.
InfiniBand Leaf Sets the administration name for the second
InfiniBand leaf switch in this rack.
Note:
The name contains alphanumeric characters.
3.2.7 Client Ethernet Configuration Page
Applications access the database through the client Ethernet network using Single
Client Access Name (SCAN) and Oracle RAC Virtual IP (VIP) addresses.
If VLAN tagging is to be used, then it must be enabled by the customer after the initial
deployment. See the My Oracle Support notes for details.
The following table lists the client network fields. Sample database client name formats
are based on the prefix entered on the Customer Details page. To modify the name
formats, click Modify.
Table 3-6 Client Ethernet Page
Client Ethernet Field Description
Starting IP Address for Pool Assigns the starting IP address for the client
network port of the servers, and switches.
Note: These addresses are also assigned to
the ILOM ports on the database and storage
servers.
The pool should consist of consecutive IP
addresses. If consecutive IP addresses are
not available, then specific IP addresses can
be modified during the configuration process.
Pool Size Defined by the hardware selection.
Ending IP Address for Pool Defined by the starting IP address and the
pool size.
Is the default gateway for database servers Specifies that the gateway IP address is the
default gateway for the database servers.
Note: This option is usually selected for the
database servers.
Chapter 3
OEDA Graphical User Interface
3-13
To Next Page
Loading...
Need help?
General