Table 3-2 (Cont.) Customer Details Page
Customer Details Field Description
Name Prefix Defines the prefix for network interfaces.
Note:
The prefix can contain any alphanumeric
character.
The prefix cannot contain spaces.
The maximum length is 20 characters.
The field cannot be empty.
The default is
dm01
.
Example:
A value of
dm01
results in a database server
host name of
dm01db01
, and a storage server
host name of
dm01cel01
.
Region Sets the region for the rack.
Note:
Select a region from the list.
Timezone Sets the time zone where the rack will be
installed.
Note:
The time zones shown are based on the
selected region.
3.2.3 Hardware Selection Configuration Page
Select your hardware from the list on the left. The list on the right contains the
hardware for your environment.
3.2.4 Rack Details Configuration Page
Click the check box if you want to include a spine switch as part of the rack
configuration. Do this for each rack that will have a spine switch.
3.2.5 Customer Network Configuration Page
Table 3-3 (page 3-8) lists the number of required IP addresses for the customer
network.
Table 3-3 Customer Network Configuration Page
Customer Details Field Description
Bonded/Non-Bonded Identifies type of network bonding.
Note: The Admin and InfiniBand networks are
non-bonded networks.
This field is not available on X7 systems.
Subnet Mask Sets the IP address mask for the subnet.
Chapter 3
OEDA Graphical User Interface
3-8
To Next Page
Loading...
Need help?
General