Table 3-12 (Cont.) Cluster Configuration Page
OS Field Description
Name Mask Defined on the Customer Details page.
Start Id Defined on the Customer Details page.
VIP Name mask Defined on the Customer Details page.
Start Id Defined on the Customer Details page.
SCAN Name Defined on the Customer Details page.
Base Adapter Sets the backup network. The options are
Not
in use
, and
Backup
.
Domain Defined on the Customer Details page.
Start IP Defined on the Customer Network page.
Pool size Defined on the Customer Network page.
Name mask Defined on the Customer Network page.
Start Id Defined on the Customer Network page.
See Also:
• "Understanding Data Security for Oracle Exadata Storage Server
Software" in the Oracle Exadata System Software User's Guide for
additional information about Oracle ASM and database-scoped security
• "Setting up Oracle Exadata Storage Snapshots" chapter in the Oracle
Exadata System Software User's Guide for information about sparse disk
groups
3.2.13.1 Configuring Automatic Cluster File System (ACFS)
Note:
Automatic Cluster File System (ACFS) requires Grid Infrastructure 12.1.0.2 or
later.
To configure ACFS during software deployment, perform these steps:
1. On the "Define Clusters Details" page, click the Advanced Options button.
2. In the pop-up window, select Enable ACFS Configuration, and click OK.
3. Click the Configure ACFS button in the Disk Group Details pane, which opens a
pop-up window.
4. Select Enable ACFS for Disk Group.
5. In the Disk Group dropdown, select the disk group in which you would like to
create ACFS.
Chapter 3
OEDA Graphical User Interface
3-23
To Next Page
Loading...
Need help?
General