Table 3-6 (Cont.) Client Ethernet Page
Client Ethernet Field Description
Defines the Hostname for the Compute Nodes Specifies that the adapter name defines the
host names for the database servers.
Note: This option is not usually selected for
the database servers.
Related Topics:
• Overview of Network Requirements (page 2-1)
• Enabling 802.1Q VLAN Tagging in Exadata Database Machine over client
networks (My Oracle Support Doc ID 1423676.1)
• Implementing Tagged VLAN Interfaces in Oracle VM Environments on Exadata
(My Oracle Support Doc ID 2018550.1)
3.2.7.1 Modifying the Default Client Ethernet Network Names
Default client network names are usually changed to meet corporate naming
standards or compatibility with existing systems. The following table lists the client
network format mask fields.
Note:
• All fields must be filled in.
• The percent signs (%) in the names are replaced by the numbers entered
into the Starting ID fields.
Table 3-7 Client Network Format Masks Page
Client Network Format Masks Field Description
Client Access Name Assigns the client access name for this rack.
Note: The name contains alphanumeric
characters.
Client Access Starting ID Assigns the starting numeric ID for the client
access name in this rack.
VIP Name Assigns the VIP name for this rack.
Note: The name contains alphanumeric
characters.
VIP Starting ID Sets the starting numeric ID for the VIP name
in this rack.
SCAN Details Assigns the SCAN name for this rack.
Note: The name contains alphanumeric
characters.
Chapter 3
OEDA Graphical User Interface
3-14
To Next Page
Loading...
Need help?
General