6. Deploy the actions.
oedacli> DEPLOY ACTIONS
Deploying Action ID : 3 alter diskgroup diskgroupsize='2500G' where diskgroupna
me='DATAC1'
Deploying ALTER DISKGROUP
Deploying Action ID : 4 alter diskgroup diskgroupsize='2500G' where diskgroupna
me='DATAC1' clusternumber=1
Deploying ALTER DISKGROUP
Validating ASM Disk status..
Disks in ASM Disk Group DATAC1 have valid status
Shrinking Disk Group size to 2500 GB
Resizing ASM Disk Group..
Checking Reblance operations in disk group DATAC1
Rebalance operations completed in disk group DATAC1
Original Grid Disk Size 2953 GB, new size 138 GB on node1celadm02.us.oracle.com
Original Grid Disk Size 2953 GB, new size 138 GB on node1celadm03.us.oracle.com
Original Grid Disk Size 2953 GB, new size 138 GB on node1celadm01.us.oracle.com
Updated/New Disk Group size 2484 GB, original size 53154 GB.
Done...
Done
3.3.3.5.3 ALTER DISKGROUPS
This command alters disk group sizing attributes for existing Oracle ASM disk groups.
Syntax
ALTER DISKGROUPS
DATASPLIT=data_split_percent
RECOSPLIT=reco_split_percent
DATAREDUNDANCY=data_redundancy_level
RECOREDUNDANCY=reco_redundancy_level
SPLITDISK=percent_of_cell_disk
WHERE
DATADG = data_diskgroup
RECODG = reco_diskgroup
CLUSTERNAME = cluster_name | CLUSTERNUMBER = cluster_number |
CLUSTERID = cluster_id
Arguments
You can modify the following sizing attributes of the
DATA
and
RECO
Oracle ASM disk
groups:
•
DATASPLIT
: Specifies a percentage of the Oracle ASM volume allocated to the
DATA disk group
•
RECOSPLIT
: Specifies a percentage of the Oracle ASM volume allocated to the
RECO disk group
•
DATAREDUNDANCY
: Specifies the redundancy level for the DATA disk group. The
accepted values are
NORMAL
or
HIGH
.
•
RECOREDUNDANCY
: Specifies the redundancy level for the RECO disk group. The
accepted values are
NORMAL
or
HIGH
.
•
SPLITDISK
: Specifies the percentage of the cell disk to allocate to the DATA and
RECO disk groups. The specified value must be less an integer between 1 and
100.
The following arguments are available in the
WHERE
clause:
Chapter 3
OEDA Command Line Interface
3-46
To Next Page
Need help?
General