Oracle EXADATA X6-2

Arguments
You can specify the following attributes for the machine:
• DNSSERVERS : Specifies a comma-separated list of DNS servers that is enclosed in
single quotes.
• GATEWAYADAPTER : Specifies the network adapter to use as the machine gateway.
Valid values are ADMIN or CLIENT .
• HOSTNAMEADAPTER : Specifies the network adapter to use as the host name. Valid
values are ADMIN or CLIENT .
• NTPSERVERS : Specifies a comma-separated list of NTP servers that is enclosed in
single quotes.
• TIMEZONE : Specifies a valid time zone for the machine.
The following arguments are available in the WHERE clause:
• ID : Specifies the es.xml ID for the target machine
• HOSTNAME : Specifies the current host name of the target machine
• CLUSTERNUMBER : Specifies the cluster number in the es.xml , starting at 1
•
CLUSTERNAME : Specifies the name of the cluster
• CLUSTERID : Specifies the es.xml ID of the cluster
• COMPUTENUMBER : Specifies the compute node number in the cluster, starting at 1
• STORAGENUMBER : Specifies the storage cell number in the cluster, starting at 1
3.3.3.11.2 LIST MACHINES
This command lists the machine available in the
es.xml file for an engineered system.
Syntax
LIST MACHINES
{ WHERE
TYPE = type |
ID = machine_id [ TYPE = type ] |
CLUSTERNUMBER = cluster_number [ TYPE = type ] |
CLUSTERNAME = cluster_name [ TYPE = type ] |
CLUSTERID = cluster_id [ TYPE = type ] }
Arguments
The following arguments are available in the
WHERE clause:
• TYPE : Specifies the machine type. The valid values are COMPUTE , CELL , STORAGE , DOM0 ,
GUEST , or DOMU .
• ID : Specifies the es.xml ID for an individual machine
• CLUSTERNUMBER : Specifies the cluster number in the es.xml , starting at 1
• CLUSTERNAME : Specifies the name of the cluster
• CLUSTERID : Specifies the es.xml ID of the cluster
Chapter 3
OEDA Command Line Interface
3-61