Log In to Oracle ILOM Using a Remote Ethernet Connection
You need to know the IP address or host name of the service processor (SP) to log in to Oracle
ILOM remotely. If you do not know the IP address of the SP, see “Troubleshooting Oracle
ILOM” on page 92.
Note - To enable first-time login and access to Oracle ILOM, a default Administrator account
and its password are provided with the system. To build a secure environment, you must change
the default password (changeme) for the default Administrator account (root) after your initial
login to Oracle ILOM. If this default Administrator account has since been changed, contact
your system administrator for an Oracle ILOM user account with Administrator privileges.
To improve response times, disable the web browser proxy server (if one is enabled).
1.
Ensure that the server is cabled for a remote network management connection
to Oracle ILOM.
For instructions for establishing a physical management connection to Oracle ILOM see
“Connecting Cables and Power Cords” on page 74.
2.
Establish a connection to Oracle ILOM using the web interface or the CLI.
■ From the web interface:
a.
Type the IP address of the server in the address field of your web
browser and press Enter.
The Oracle ILOM login screen appears.
82 Oracle Server X6-2 Installation Guide • July 2020
To Next Page
Loading...
Need help?
General