Orban OPTIMOD 8400 - To Unlock the Front Panel

2-42
INSTALLATION ORBAN Model 8400
case sensitive. For example, if you set up your passcode as OOPS25, you must
enter it as OOPS25, not as oops25 or Oops25.
C) When you have finished creating your passcode, write it down so you do not forget
it.
D) Choose Save. The Security screen reappears.
E) Initially, your new passcode has All Screens (administrator) privileges. To change
its privileges, navigate to the
Passcode Authorizes Access To field. Then turn the
knob to choose the desired privilege level.
F) Choose Done when you are finished. The System Setup screen appears.
Choosing
Done on the Security Screen automatically saves all of your Pass-
code settings. If you would like to cancel any new settings, Escape out of the
screen via the
Escape button on the 8400 (or via your PC’s ESC key if you are
connected through PC Remote).
4. Edit or delete an existing passcode (optional).
A) Navigate to System Setup and then to Security
If the 8400 is already under security control, you must enter an All Screens-
level passcode to enter the Security screen.
B) Navigate to the Current Passcode field. Use the blue knob to scroll through the
passcodes until you see the one you wish to edit or delete.
C) To delete the passcode, choose the Delete button.
At least one passcode must have “All Screens” privileges. If you try to delete
the last “All Screens” passcode, the following dialog box will appear:
You cannot delete this Passcode because you must have at least
one Passcode with All Screens privileges. Press OK to continue.
D) To edit the passcode, navigate to the Passcode Authorizes Access To field. Then
turn the knob to choose the desired privilege level.
E) Choose Done when you are finished. The System Setup screen appears.
You may edit or delete more than one passcode before choosing
Done.
Choosing Done on the Security Screen automatically saves all of your Pass-
code settings.
To Unlock the Front Panel
A) On the 8400 front panel, operate any button or the knob.
The
Enter Passcode screen appears.
B) Enter your passcode using the virtual keyboard.