3-66
OPERATION ORBAN Model 8400
Navigation Using the Keyboard
Use the ESC key to bring up the meter screen, as in the 8400.
If you are in the meter screen,
ESC brings up the main menu. So pressing ESC twice will
bring up the main menu from almost anywhere.
Navigate around the screens using the left, right, up, and down arrow keys. To move to
the next screen in the same menu, hold the left or right arrow key down for about a half
second.
Use the + and – keys on the numeric keypad to adjust control settings.
Use the
ENTER key to put highlighted presets on-air, and to “click” buttons that you have
highlighted by navigating to them with the arrow keys.
To Quit the Program
Use standard Windows conventions: Press ALT-F4 on the keyboard, or click the X on the
upper right corner with the mouse.
To Next Page
Loading...
