OTARI MX-5050 - Page 144

Index
INDEX 2
May 1992
MX-5050 Operation and Maintenance Manual
L
Level Type Signal, 2-7
Lifter Defeat, 4-3
Line Input, 8-3
Line Input Connectors, 3-9
Line Output, 8-3
Line Output Connectors, 3-9
Lissajous Pattern, 7-6, 7-9
Low Comp Pot, 7-4
Low Version Models, 7-7
Low Frequency Reproduce Equalization Adjustment, 7-11
Lubrication Oil, 2-2, 5-2, 5-4
M
Maintenance Schedule, 5-2
Mic. Input Connector, 3-11
Mic. Attenuator, 2-5, 3-11, 7-4
Mini Locator, 1-3, 4-11
Monitor Selection, 7-4
Motor, 8-2
Monitor Button, 3-8
MRL Tape, 7-2
O
Operating Envionment, 8-4
Optional Accessories, 8-4
Output Transformers, Optional, 2-4
Output Level, 8-3
Output Level knob, 3-8
Output Level Setting, 2-5
Output Level Switch, 2-5, 3-11
P
Parallel I/O Connector, 3-11, 3-12
Peak Level Indicator, 3-8
Peak Indicator Level, 7-3
Phone Jack, 3-8
Pinch Roller, 3-2, 5-4
Pinch Roller Pressure, 6-6, 6-7
Pitch Control, 4-10
Pitch Control Knob, 3-4
Playing Back, 4-7
PLAY button, 3-5
Power Connector, 2-13, 3-11
Power Cable, 2-2, 2-13
Power Switch, 3-3
Punch In/Out, 2-6
R
Ready, 4-4, 4-7
Rear Head Escutcheon, 5-4
Recording, 4-7
Record Bias Level, 7-8
RECORD button, 3-5
Record Head, 3-6
Record Head Azimuth Adjustment, 7-9
Record Mode indicator, 3-8
Record Ready buttons, 3-8
REC/REP AMP PCB Assembly, 2-9
Reel Adapter, 4-5
Reel Clamp, 2-2
Reel Size, 8-2
Reel Size Change Switch, 3-5
Reel Table Height Adjustment, 6-9
Reference Flux Indicator, 3-8
Reference Flux Switch, 3-11
Remote Control Connector, 3-13
Repeat Button, 3-4
Repeat mode, 4-13
Reproduce Head, 3-6
Rewind button, 3-5
S
Search mode, 4-11
Search Play, 4-12
Search Zero, 4-12
Search Start, 4-12
SEARCH 3 Key Function, 2-7
SEARCH ZERO button, 3-4
SEARCH 1, 2, 3 buttons, 3-4
Safe Mode, 4-4
SEL-REP Mode button, 3-8
SEL-REP Indicator, 3-8
SEL-REP Level Adjustment, 7-12
SET button, 3-3
SEL-REP Recording, 4-8
SEL-REP Monitor Mode, 4-4
Signal to Noise Ratio, 8-3
Speed Mode Select button, 3-4
Speed Mode Indicator, 3-4
Speed Version Selection, 2-6, 2-15
SRL Indicator, 3-8
Standard Reference Flux, 8-3
Start Time, 8-2
Stop Time, 8-2
STOP button, 3-5
Storage Environment, 8-4
Supply Reel Table, 3-2