2) Push the joystick all the way back until a beep sounds.
3) Release the joystick.
→ A long beep confirms that the driving function is enabled.
→ The [Charge level] LED indicator is lit.
→ The drive-away lock is deactivated and driving is enabled.
Troubleshooting
The drive-away lock remains active if the joystick is not moved correctly.
1) Turn the control unit off in order to deactivate the drive-away lock again.
2) Turn the power wheelchair on.
3) Deactivate the drive-away lock again.
6.7.8.2 R-Net control unit
INFORMATION
This function is currently not enabled.
For questions related to enabling it, please consult the qualified personnel that adapted the product or the manu
facturer's service (see inside back cover or back page for addresses).
The power wheelchair control unit features an electronic drive-away lock. This function is activated/deactivated via
the control panel.
Activating the drive-away lock
1) Press and hold the [On/off] button while the control unit is turned on.
2) Release the [On/off] button after a beep sounds (approx. 1 second).
3) Push the joystick all the way forward until a beep sounds.
4) Push the joystick all the way back until a beep sounds.
→ A long beep confirms that the drive-away lock was activated.
→ The control unit turns itself off.
→ The key symbol on the LCD screen indicates that the drive-away lock is activated:
Symbol Information
Drive-away lock
Deactivating the drive-away lock
1) Push the [On/off] button on the control panel.
→ The control unit is turned on. The LCD screen indicates that the drive-away lock is activated.
2) Push the joystick all the way forward until a beep sounds.
3) Push the joystick all the way back until a beep sounds.
4) Release the joystick.
→ A long beep confirms that the driving function is enabled.
→ The battery indicator and speed level are shown on the LCD screen.
→ The drive-away lock is deactivated and driving is enabled.
Troubleshooting
The drive-away lock remains active if the joystick is not moved correctly.
1) Turn the control unit off in order to deactivate the drive-away lock again.
2) Turn the power wheelchair on.
3) Deactivate the drive-away lock again.
49Juvo
Use
To Next Page
Loading...
