Otto Bock Juvo - Use; Mounting Kit for Head;Neckrests; Headrest

6.10.7.2 Use
50
Folding down the backrest (reducing the transport
size)
1) Pull the release lever up (see fig.50, item1).
2) Fold the backrest forward or back.
3) Let go of the release lever.
51
Remove the headrest
Two persons are required to remove the headrest.
1) 1st person: Find the release points on the Recaro®
seat below the cover and push on them both at the
same time.
2) 2nd person: Pull the headrest up and remove.
6.10.8 Mounting kit for head/neckrests
52
The mounting kit is used to install head/neckrests. It is
mounted to the back frame by means of an adapter.
Detailed information regarding use, maintenance and
repair can be found in the included instructions for use.
6.10.9 Headrest
The head support or head/neckrest stabilises and guides the user's head. It has been mounted to the mounting kit
for head/neckrests by qualified personnel.
Detailed information regarding use, maintenance and repair can be found in the included instructions for use.
60
Use
Juvo