Owon HDS-N series User Manual

OWON HDS-N Series Handheld DSO & DMM 6-Using the Oscilloscope
27
6.18 Use USB mass storage device to save waveform
data
Insert the USB mass storage device into the USB port and press copy key, then the current
waveform data will be saved into the USB mass. The save waveform has two format, one is vector
format and another is bitmap format, according to the display settings from the choice of the
communication settings. Then the file name in sequence will be WAVE1.BIN、WAVE2 .B IN、
WAVE3.BIN… or WAVE1.BMP、WAVE2 .B MP、WAVE3.BMP……. Then connect the USB mass
storage device with the computer after data is saved, and open the data of vector format with
OWON analysis software, or direct open the bitmap.
Note: It has clew in a series of process USB operation storage, such as "USB save successfully".

Owon HDS-N series Specifications

General

Brand	Owon
Model	HDS-N series
Category	Multimeter
Language	English