OWON HDS-N Series Handheld DSO & DMM 8-Advanced Function of Oscilloscope
75
8.17 Data Transmission
For the operation of data transmission, please execute the following steps:
1. Press MENU key, display the function menu on the right side of the screen.
2. Press MENU ▲ or MENU ▼ key to select DISP SET.
3. Press F4 key, select the Bitmap or Vectors for data transmission.
4. Use a data line to connect the oscilloscope and the PC.
5. Open the OWON software that had been installed completely.
6. Setting the parameter under the use's manual, and then starts data transmission.
To Next Page
Loading...
