Owon HDS-N series User Manual

OWON HDS-N Series Handheld DSO & DMM 8-Advanced Function of Oscilloscope
CH1
CH2
Measure the peak-to-peak value of CH1.
Measure the peak-to-peak value of CH2.
PK-PK
CH1
CH2
Measure Root Mean Square (RMS) value of CH1.
Measure Root Mean Square (RMS) value of CH2.
Cyc RMS
CH1
CH2
Measure the
Vmax of CH1
Measure the
Vmax of CH2
Vmax
CH1
CH2
Measure the
Vmin of CH1
Measure the
Vmin of CH2
Vmin
CH1
CH2
Measure the
Vtop of CH1
Measure the
Vtop of CH2
Vtop
CH1
CH2
Measure the
Vbase of CH1
Measure the
Vbase of CH2
Vbase
CH1
CH2
Measure the
Vamp of CH1
Measure the
Vamp of CH2
Vamp
CH1
CH2
Measure the
Overshoot of CH1
Measure the
Overshoot of CH2
Overshoot
CH1
CH2
Measure the
Preshoot of CH1
Measure the
Preshoot of CH2
Preshoot
CH1
CH2
Measure the
Rise Time of CH1
Measure the
Rise Time of CH2
Rise Time
CH1
CH2
Measure the
Fall Time of CH1
Measure the
Fall Time of CH2
Fall Time
CH1
CH2
Measure the
+Width of CH1
Measure the
+Width of CH2
+Width
CH1
CH2
Measure the
-Width of CH1
Measure the
-Width of CH2
-Width
CH1
CH2
Measure the
+Duty of CH1
Measure the
+Duty of CH2
+Duty
CH1
CH2
Measure the
-Duty of CH1
Measure the
-Duty of CH2
-Duty
CH1
CH2
Measure the
DelayA B of CH1
Measure the
DelayA B of CH2
DelayA B
CH1
CH2
Measure the
DelayA B of CH1
Measure the
DelayA B of CH2
DelayA B
To measure the frequency of CH1 with Measurement 1 and the peak-to-peak value of CH2 with
Measurement 2, do the following:
1. Press the MENU key and the function menu is shown at the right of the screen.
2. Press the MENU ▲ or MENU ▼ key to select MEAS SET 1. Five options appear at the
bottom of the screen.
3. Press the F1 key to select the frequency measurement as CH1. The measurement window on
the screen turns into one red in color and shows the frequency of CH1.
56

Owon HDS-N series Specifications

General

Brand	Owon
Model	HDS-N series
Category	Multimeter
Language	English