PacketLight Networks PL-300 - Example 5: Using Pl-300 Dwdm-2 M-8 W-2 C-2 F; Figure 36: Using PL-300 DWDM-2 M-8 W-2 C-2 F (Example)

APPENDIX B:PL-300 APPLICATION EXAMPLES
PACKETLIGHT NETWORKS PL-300 3.2 INSTALLATION AND CONFIGURATION MANUAL
CONFIDENTIAL AND PROPRIETARY INFORMATION. ALL RIGHTS RESERVED. PAGE 49
B.1.5 Example 5: Using PL-300 DWDM-2M-8W-2C-2F
In this example, the PL-300 DWDM-2M-8W-2C-2F is connected on one side to
two PL-1000RO nodes, and on the other side to two PL-1000 nodes.
The described site is a part of an optical ring. It add/drops four protected
wavelengths of 10G clients.
By changing the PL-1000RO configuration, the user can change the
added/dropped wavelengths to a different set of channels, thereby allowing
flexible optical connectivity on the ring.
Figure 36: Using PL-300 DWDM-2M-8W-2C-2F (Example)