Application-specific tasks
95
5.
Select the 5 and enter any number from 0 to 99 (inclusive) as the number of time
units.
6.
Tap O K.
7.
When the reminder message appears on screen, do one of the following:
Tap OK to permanently dismiss the reminder and return to the current screen.
Tap Snooze to dismiss the reminder and return to the current screen. The
reminder message appears again five minutes after you tap Snooze, and an
attention indicator blinks in the upper-left corner of the screen to remind you of
the pending alarm.
Tap Go To to open Date Book. Date Book will open and display the event
associated with the alarm.
Alarm for untimed events:
You can set a silent alarm for an untimed event. In this
case, the alarm triggers at the specified period of minutes, hours, or days before
midnight (beginning) of the day of the untimed event. When the alarm triggers, the
reminder list displays the alarm message until you clear it. See “Reviewing
Reminders”in this chapter for details.
For example, you set an alarm for an untimed event that occurs on February 4th. If
the alarm is set for 5 minutes, the reminder message appears at 11:55 PM on the
night of February 3rd. The reminder remains in the reminder list until you turn on
your handheld and dismiss it.
Scheduling repeating or continuous events
The Repeat function lets you schedule events that recur at regular intervals or
extend over a period of consecutive days.
Tap here to
select unit of time
Enter number of
time units here
To Next Page
Loading...
Need help?
General
