Palm t/x Handheld User Manual

T|X Handheld 94
CHAPTER 8 Your Wireless Connections
Setting up a Bluetooth
®
phone connection
To set up a phone connection, you must have a GSM or GPRS mobile phone
enabled with data services.
0O
1
Tap Bluetooth controls on the status bar.
2 Select Setup Devices, select Phone Setup, select Phone Connection, and then
select Next.
3
Select the phone you want to connect to:
a. Select the Manufacturer and Model pick lists, select the correct entries for
your phone, and then select Next.
If the phone does not appear on the list, check for phone compatibility at
www.
palm.com/us/support/downloads/phonelink.html.
b. The Connection Setup screen displays all Bluetooth phones within range.
If your phone is not listed on the discovery results, check whether your
phone is discoverable. Select Find More to search again.
c. Select the phone you want, select OK, and then select Next.
Not all features are available if your specific phone model is not in
the pick list.
Continued
Before You Begin
[ ! ]
If you have an IR phone,
you must download the
Phone Link application
from the web. Go to
www.
palm.com/us/
support/downloads/
phonelink.html to
download the software.
Tip
If you receive a message
that your phone is not
ready to accept a
connection, check to
make sure that your
phone is prepared to
make a Bluetooth
connection. See the
documentation included
with your phone for
instructions.
»
Key Term
GPRS Acronym for
General Packet Radio
Service, a method of
sending information
wirelessly at high speeds.
IMPORTANT
[
! ]
NOTE

Palm t/x Handheld Specifications

General

Brand	Palm
Model	t/x Handheld
Category	Handhelds
Language	English