DT90053
Real-Time Clock
monitor (hour/minute)
Hour and minute data of the Real-Time Clock
are stored here. This data is read-only data. It
cannot be overwritten.
A N/A
DT90054
Real-Time Clock
setting
(minute/second)
The year, month, day, hour, minute, second
and day-of-the-week data for the Real-Time
Clock is stored. The built-in Real-Time Clock
will operate correctly through the year 2099
and supports leap years. The Real-Time Clock
can be set by writing a value using a
programming tool software or a program that
uses the F0 (MV) instruction.(see example for
DT90058)
As a day of the week is not automatically set
on FPWIN GR, fix what day is set to 00, and
set each value for 00 to 06.
To Next Page
Loading...
