Panasonic AFPX-C30T User Manual

1.4 Programming Tools
1.4.1 Tools Needed for Programming
1. Programming tool software
- The tool software can also be used with the FP
series.
- “FPWIN Pro Ver.6” or “FPWIN GR Ver.2” Windows
software is used with FP-X.
FPWIN GR Ver.1x, NPST-GR and FP
Programmer cannot be used.
2. PC connection cable
- The dedicated cable is available.
- A commercial USB cable can be used for the
connection for C30/C60 control unit.
1.4.2 Software Environment and Suitable Cable
Standard ladder diagram tool software FPWIN-GR Ver.2
Type of software OS (Operating system)
Hard disk
capacity
Product No.
FPWIN GR Ver.2
English-
language menu
Full type
Windows98
WindowsMe
Windows2000
WindowsXP
Windows Vista
Windows

7
40MB or more
AFPS10520
Upgrade
version
AFPS10520R
Note1) Ver.1.1 must be installed to install the upgrade version.
Note2) Ver.2.0 can be upgraded to the latest version after Ver. 2.1 free of charge at our web site
(http://panasonic-denko.co.jp/ac/e/dl/software-list/patch/plc.jsp). Use the latest version.
Conforms to IEC61131-3 programming tool software FPWIN-Pro Ver.6
Type of software OS (Operating system)
Hard disk
capacity
Product No.
FPWIN Pro Ver.6
English-language menu
Windows2000
WindowsXP
Windows Vista
Windows7
100MB or more FPWINPROFEN6
Note1) The small type and upgrade version is not available for Ver.6.
Note2) Ver.6.0 can be upgraded to the latest version after Ver. 6.1 free of charge at our web site
Phone: 800.894.0412 - Fax: 888.723.4773 - Web: www.clrwtr.com - Email: info@clrwtr.com

Panasonic AFPX-C30T Specifications

General

Brand	Panasonic
Model	AFPX-C30T
Category	Controller
Language	English