Panasonic AFPX-C30T - Page 85

5.5.2 DC Power Supply
Wiring of power supply
Confirm that the power supply voltage is within the allowable range of the power supply.
Rated input voltage
Allowable voltage
amplitude range
24 VDC 20.4 to 28.8 VDC
Note:
Using the power supply of the outlying voltage, or using inappropriate wires may cause the fault of the
power supply of the PLC.
Reference: <5.7 Wiring of Terminal Block>
Isolation of power supply systems
Isolate the wiring systems to the FP-X, output devices and mechanical power apparatus.
Phone: 800.894.0412 - Fax: 888.723.4773 - Web: www.clrwtr.com - Email: info@clrwtr.com