Panasonic AG-AC30 - Page 49

- 49 -
∫ To adjust the magnified display
If you set Focus Assist to ON by following either of the procedures below, the central area of the
screen will be magnified. You can change the magnification and position of the magnified display.
j Setting the menu item [FOCUS ASSIST 1] to [EXPAND] or [BOTH] and pressing the USER
button to which [FOCUS ASSIST 1] is registered.
j Setting the menu item [FOCUS ASSIST 2] to [EXPAND] and pressing the USER button to
which [FOCUS ASSIST 2] is registered.
≥ You can also change the magnification level of the magnified display using the jog dial.
(To change the magnification level)
Touch / or rotate the jog dial to change the magnification level.
≥ You can adjust the magnification from 3k to 10k.
(Moving the magnified area)
Touch / / / or slide the screen while touching it to move the magnified
area.
∫ To change the peaking settings
If you set Focus Assist to ON by following either of the
procedures below, in-focus portions are highlighted with
color (peaking).
j Setting the menu item [FOCUS ASSIST 1] to
[PEAKING] or [BOTH] and pressing the USER button
to which [FOCUS ASSIST 1] is registered.
j Setting the menu item [FOCUS ASSIST 2] to [PEAKING] and pressing the USER button to
which [FOCUS ASSIST 2] is registered.
G: Peaking
≥ You can set the peaking color and strength.
: Increases the magnification level by 0.5k.
: Decreases the magnification level by 0.5k.
SEL/
PUSH
SET

x3.0x3.0x3.0



A 3k–5k display
B
5.5k–10k display
C [ASSIST]
D Magnified display
E [EXIT]
F Jog dial
x5.5
x5.5x5.5
 


R68S3_PJPB.book 49 ページ ２０１６年９月２日 金曜日 午前１０時４３分