6
How to Use this Reference Manual
If the characters, icons, etc. in the Reference Manual are too small
and too difficult to see, you can magnify them as follows.
1 Click to use Zoom In Tools.
2 To magnify the display and make it easier to see, position
the cursor and click on the segment you want to expand.
z If it is magnified too much, click on the same segment while
holding down the
Ctrl
key to reduce the size.
3 When required, click on and drag it to the screen to
display the segment you want to see.
This Reference Manual is displayed using Acrobat
®
Reader. Acrobat
®
Reader uses the
following methods to magnify and reduce the display size.
z Tools for magnifying/reducing the display
A. Zoom In Tool: Click to enlarge the display in the area around the position that was
clicked. Drag to magnify the display in the area selected.
B. Zoom Out: Display size is reduced each time this button is clicked.
C. Enter the percentage for magnification/reduction, and press the
Enter
key to
change the display to the specified size.
D. Zoom In: Display size is magnified each time this button is clicked.
Magnify this Reference Manual Display
To Next Page
Loading...
Need help?
General