137
Dealing with Problems (Advanced)
How to input European characters (ß,
à, ç, etc.), symbols or Euro currency
symbol is unclear
z Display the character map and point to the desired font name, such as
European fonts, and select it with the following procedure.
Click [start] - [All Programs] - [Accessories] - [System Tools] - [Character Map]
Networking: General
Unable to connect to a network z Confirm that either [Modem], [LAN] or [Wireless LAN] is set to [Enable] in the
Setup Utility (Î page 122)
z When using the computer as a network computer, some additional settings may
have to be made depending on the usage conditions. We recommend asking
your system administrator or the person in charge of the network
z If the standby or hibernation mode is entered, the computer may have to be
restarted
z If the link lamp on the HUB unit is not on and the network cannot be accessed,
set the speed to match the HUB unit (Î page 108)
Cannot access the Internet z Check address for proxy server, etc.
z Ask your system administrator
Cannot access e-mail, Internet, or
intranet (when using TCP/IP)
z Is the LAN cable connected properly?
z Confirm IP address settings, sub-net mask settings, and default gateway
settings
Cannot see homepages on the
Internet
z When connected via a phone line
• Have you completed a contract with an ISP provider? If not, contact an ISP
provider.
• Have you completed the TCP/IP settings? If not, follow the ISP provider’s
instructions
z When connected via a LAN:
• Have you completed a contract with a provider, or an application to your
system administrator? If not, contact the provider or network system
administrator
• Have you completed protocol settings? If not, follow instructions from the
provider or network system administrator
z When connected via a wireless LAN:
• Have you completed the wireless LAN settings? If not, make the settings
• Refer to “Networking: Wireless LAN” (Î page 139)
Keyboard
To Next Page
Loading...
Need help?
General