EasyManuals Logo

Panasonic CF-W2 Series Reference Manual

Panasonic CF-W2 Series
177 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #141 background imageLoading...
Page #141 background image
141
Dealing with Problems (Advanced)
Communication speed decreases z Communication speed may decrease if, aside from the access point to which
this computer is connected, there is another access point nearby using the
same channel or a similar channel. Change the channel on the connection
access point, and check to see if the speed recovers. Confirm method for
changing channels using the access point manual
z The rate may drop while a microwave oven is being used
z When using a wireless LAN in an environment that combines both
IEEE802.11g and IEEE802.11b, communication speed when using
IEEE802.11g may decrease
Communications with access point are
cut off
z Shorten the distance between the computer and the access point, and try the
detection again
z If there are multiple access points aside from the access point to which this
computer is connected, confirm that different channels have been set for each
access point
z Set [CPU Idle Setting] to [Performance] (Î page 144)
Unable to connect to a network z Is the IP address of the access point wrong?
Following the operating instructions of the access point, set the IP address of
the access point again correctly
Cannot communicate via an ADSL, or
cable modem
z Check to see whether IP address and DHCP server settings are set as
indicated by the ISP provider
Cannot set wireless LAN to [Enable] or
[Disable]
z It may become impossible to set the wireless LAN to [Enable] or [Disable] if
these settings are changed repeatedly on the [Network Connection] screen. In
this case, restart the computer
z Press the
F9
key in the Setup Utility. This will restore the Setup Utility's
settings to their default values (except the password settings)
Connecting Peripherals
An error occurs while installing the
driver
z When you install the driver for a PC Card or peripheral device, be sure to use a
driver that is compatible with the operating system. If you use an incompatible
driver, malfunction may occur. For information on drivers, contact the
manufacturer of the peripheral device you purchased
Networking: Wireless LAN

Table of Contents

Other manuals for Panasonic CF-W2 Series

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Panasonic CF-W2 Series and is the answer not in the manual?

Panasonic CF-W2 Series Specifications

General IconGeneral
BrandPanasonic
ModelCF-W2 Series
CategoryDesktop
LanguageEnglish

Related product manuals