To Next Page

To Previous Page

Standby/Hibernation Functions

If you use the standby or hibernation function, you can shut down the computer without

closing programs and documents. When restarting your computer from either the standby or

hibernation mode, you can immediately continue working in all programs or documents that

were open at the time the computer was placed into standby or hibernation mode.

Differences between the Standby and Hibernation Functions

NOTE

z We recommend plugging in the AC adaptor if the standby function is to be used for a

long period of time. If the AC adaptor cannot be connected, we recommend that

hibernation mode be used instead of the standby mode

z If the standby or hibernation function is used repeatedly, the computer may not work

properly. To stabilize computer operations, shut down Windows on regularly (about

once a week) without using the standby or hibernation function

Use any of the following methods to enter the standby or hibernation mode.

To use the hibernation mode, set [Power Options] in advance (Î page 39).

(Enabled in factory preset)

z Press the

key or the

F10

key to put your computer in the standby or hiberna-

tion mode (Î page 18)

z Using the power switch (Î page 41)

z Closing the display (Î page 42)

Starting Up Your Computer Quickly

Function Where data is

saved to

Time until

resume

Need for power supply

Standby

function

Memory Short Yes

(if power is cut, all data is lost)

Hibernation

function

Hard disk Rather long Power is not required to maintain data

Entering the Standby or Hibernation Mode

Panasonic CF-W2 Series Reference Manual

Other manuals for Panasonic CF-W2 Series