Panasonic DP-2330

126
DP-2330/3030
DEC 2004
Ver.2.0
DP-2310/3010
4.2.6. Fax Service Mode 6 (RAM Initialization)
Initializes RAM and restores the Function Parameters to their default values.
Note:
This operation should be performed when the unit is first installed.
Select the "06 RAM initialize" on the Touch Panel display.
↓
Select the desired code number on the Touch Panel display.
↓
Touch the "YES" key to initialize RAM.
↓
Touch the "OK" button 3 times.
↓
Press "FUNCTION" and "C (CLEAR)" keys simultaneously to exit the service mode.
RAM Initialization Table
No. Initialize Mode Description
01 Parameter Initialize Restores the Fax and Function Parameters to default
values.
Note: Turn the Power Switch to the OFF and back to the
ON position to enable the parameter settings.
02 Journal Clear Clears the Journal contents.
03 Auto Dial Clear Clears the One-touch, ABBR Numbers and Phone Books.
04
Program Dial Clear
Clears the Program keys.
05 LOGO/ID/PSWD Clear Clears the Logo, ID, Polling Password.
06 LBP Error Log Clear Clears the Printer Error Log.
07 Shipment Set Deletes all setting information, except parameter number
80 and 81, then set default values.
08 Flash Memory Clear Deletes all information in the Flash Memory.
09 All Job Clear Clears all Jobs stored in Flash Memory.