Panasonic DP-3000 User Manual

13
1.1.7. Sleep Mode
Note:
When 10/100 Ethernet Interface / Internet Fax Kit is installed, the Sleep Mode is disabled.
This function reduces the power consumption in standby mode. During Sleep Mode, power is supplied only
to the Energy Saver Lamp to keep it at a steady ON condition, to the circuit that monitors incoming Ringing
signals and to circuits that maintain Deferred communications. The power is recovered only when an
incoming Ringing signal is detected, the time to perform a Deferred communication has lapsed or the
Energy Saver key is pressed.
Sleep Mode Availability
Recovers from Sleep Mode
No. Item Sleep Mode Remark
1 10/100 Ethernet Interface/Internet Fax Kit
Option is installed
No
2 When an ALARM Status indication is dis-
payed
No
No. Item
Recovers from
Sleep Mode
Remark
1 When Energy Saver key is pressed Yes
2 Deferred Communication time is lapsed Yes
3 Time for Deferred Communication Yes
4 Original Sensor is actuated Yes No Document Sensor with Flatbed
5 Ringing signal detected Yes No 1300Hz detection
6 Off-Hook (External telephone or Handset) Yes
7 When printing from a PC Yes

Panasonic DP-3000 Specifications

General

Brand	Panasonic
Model	DP-3000
Category	Copier
Language	English