43
VQT1H64
Recording
To end PRE-REC
PRE-REC is also ended if you press the
PRE-REC button in PRE-REC standby mode.
≥ PRE-REC is cancelled in the following cases.
jIf you operate the mode dial.
jIf you turn the unit off.
jIf you open the SD card/battery cover.
jIf you press the MENU button.
jIn quick start standby mode.
≥ If you start recording less than 3 seconds after
pressing the PRE-REC button, the PRE-REC
function is not activated and the pictures are
recorded normally.
≥ When the remaining time left for recording
motion pictures is less than 1 minute,
PRE-REC cannot be set.
≥ When the recording start/stop button is
pressed, image shake and operation sound
may be recorded.
HDCSD5-VQT1H64_eng.book 43 ページ ２００７年８月１日 水曜日 午後７時１６分
To Next Page
Loading...
