With other products
86
VQT1H64
¬Connect the AC adaptor supplied with the DVD burner to the DVD burner. (You
cannot supply power to the DVD burner from this unit.)
≥ Please read the operating instructions of the DVD burner for how to use it.
1 Connect this unit to the AC adaptor.
≥ If a battery is used, operation is not possible when this unit is connected to a DVD burner.
2 Set the mode dial to to turn on the power.
3 Connect this unit and the DVD burner.
A Mini AB USB Connection Cable (supplied with the DVD burner)
B DVD burner (optional)
≥ Connect the MiniA terminal to this unit and the MiniB terminal to the DVD burner.
≥ Insert the plugs as far as they will go.
≥ [ ] (disc playback) tab C appears.
≥ If [ ] (disc playback) tab does not appear even when the DVD burner
is connected, disconnect and then reconnect the Mini AB USB
Connection Cable.
≥ “PLEASE CHECK EXTERNAL DRIVE OR DISC.” appears when a disc
is not inserted in the DVD burner.
4 Insert the disc in the DVD burner.
Mini A
Mini B
A
B
C
HDCSD5-VQT1H64_eng.book 86 ページ ２００７年８月１日 水曜日 午後７時１６分
To Next Page
Loading...
