4 Installation
4.1 Required Space Around the Scanner
In order to ensure proper operation, install the unit maintaining the proper distances from surrounding
objects, as shown in the following illustration.
200 mm
200 mm
250 mm
200 mm
(7.9 in.)
(7.9 in.)
(7.9 in.)
(9.8 in.)
Front
Notice
• Do not move the unit immediately from a cold place to a warm place. It may cause condensation,
which may damage the unit. Using the unit immediately will cause the document scanning to be
imperfect. T
o avoid this, clean the inside rollers with a dry and soft cloth, leave the unit in a warm
place for 1 or 2 hours, and then use the unit after you make sure that the inside of the unit has dried.
• If you use the straight path (rear exit) for documents, space behind the unit is required for documents
to exit.
4 Installation
13
To Next Page
Loading...
