Panasonic KV-S8147 - Adjusting the Height of the Feed Tray

5.3.1.1 Adjusting the height of the feed tray
When automatic feeding is set, and you start scanning, the feed tray automatically moves to a feeding
position appropriate for the quantity of documents. If you adjust the height of the feed tray in advance, you
can reduce the time required for the feed tray to move. When the Home screen is on the LCD, press or
of the cursor button to adjust the height of the feed tray. The possible height adjustments of the feed tray are
shown below.
Height
(Sheets
*1
)
LCD display
(Icons)
Settings Can be enabled/disabled
50 — Always enabled
150 Tray Position 6 Yes
*2
250
Tray Position 5 Yes
*2
350 Tray Position 4
Yes
*2
(Enabled by default)
450
Tray Position 3 Yes
*2
550 Tray Position 2 Yes
*2
650 Tray Position 1 Yes
*2
750
— Always enabled
*1
The number of sheets for 80
g/m² (21 lb.) paper.
*2
For details, see "Tray Position 1 - Tray Position 6" (page 29).
Note
• When manual feeding is set, you cannot change the position of the feed tray because the feed tray is
fixed at the uppermost stage.
5.3.1 Home screen
27