Panasonic KV-S8147 - When Opening the Pre-Imprinter Door for Purposes Other than Installing;Uninstalling the Imprinter Unit and Ink Cartridge

6.5.1.2 When opening the pre-imprinter door for purposes other than
installing/uninstalling the imprinter unit and ink cartridge
Follow the procedure below when changing the imprinter printing position, etc.
1. Press of the cursor button for 1 second or more.
• The exit tray will move up. Pay attention that your fingers or anything do not get pinched.
• The exit tray will move up only when the pre-imprinter is installed.
2. Raise the exit tray (
).
1
3. Open the pre-imprinter door
.
6.5.1 Opening the pre-imprinter door
37