7.3 Using Push Scan
This scanner has a push scan function for starting scanning without operation through a computer
.
7.3.1 Setting the scanning conditions
Scanning conditions are set on the setting screen of each application. For details about the setting screen of
each application, refer to the manual or help for that application.
Note
• Press and hold the Enter button (
) or Start/Stop button ( ) for more than 2 seconds to open
the application setting screen.
• If the unit is in sleep mode, press any button (except the power button ( )) on the scanner’s operation
panel to return to ready mode first.
7.3.2 Selecting the behavior of push scan
Select the behavior of push scan using the
Scan Button Setting Tool.
1. Double click the (
) icon in the notification area of the task bar to open the Scan Button Setting Tool.
• In Windows 8, open the
Scan Button Setting Tool on the Desktop screen.
2. Select [Touch Free Scanning] or [Single Touch Scanning].
Note
• In Image Capture Plus and Scan Button Setting Tool, [Single Touch Scanning] means performing
push scanning using the LCD.
• For details about the Scan Button Setting Tool, refer to the Scan Button Setting Tool help.
7.3 Using Push Scan
58
To Next Page
Loading...
