Panasonic KV-S8147 - Clearing the Counter after Cleaning the Rollers

9.2.5 Clearing the Counter After Cleaning the Rollers
After cleaning the rollers, set the After Clean Roller Counter to zero (0) from the operation panel (
page 20).
1. Press the menu button (
).
2. Use
or of the cursor button to select "Counter".
3. Press the Enter button ( ) to complete your selection.
4. Use or of the cursor button to select "Clear Clean Roller Counter".
5. Press the Enter button (
) to complete your selection.
Note
• The After Clean Roller Counter
can also be cleared from User Utility. For details, refer to the User
Utility help.
9.2.5 Clearing the Counter After Cleaning the Rollers
76