Panasonic KV-S8147 - Returning from Sleep Mode; Opening the ADF Door

Turning OFF the unit's power
1. Press and hold the power button ( ) for 1 second or more until the Ready LED (Green) turns off.
• The exit tray will move down.
Notice
• Pay attention that your fingers or anything do not get pinched in the feed tray or the exit tray
.
6.2 Returning from sleep mode
For details about operation panel, refer to "5 Operation Panel" (page 20).
1. Press any button other than the power button (
) on the operation panel.
6.3 Opening the ADF door
1. Remove all documents from the exit tray
.
2. Pull the ADF door release (
) upwards, and open the ADF door ( ).
2
1
6.2 Returning from sleep mode
33