Panasonic KV-S8147 - Opening the Post-Imprinter Door; Changing the Language Used on the LCD

6.5.2 Opening the post-imprinter door
• Check that the unit has been turned of
f.
1. Open the post-imprinter door.
6.6 Changing the language used on the LCD
Y
ou can change the language used on the LCD.
1. Press the menu button (
).
2. Press the Enter button ( ) to complete your selection.
3. Press
of the cursor button once.
4. Use or of the cursor button to select a language used on the LCD.
5. Press the Enter button ( ) to complete your selection.
6.5.2 Opening the post-imprinter door
38