Items Contents
Tray Position 1 - Tray
Position 6
Sets whether a specific height of the feed tray position can be selected using
or of the cursor button.
Roller Cleaning
Notification
Enables (On) or disables (Off) the roller cleaning notification.
Roller Replacement
Notification
Enables (On) or disables (Off) the roller replacement notification.
Glass Cleaning
Notification
Enables (On) or disables (Off) the glass cleaning notification.
Select Counter Selects the counter from [Scan], [System] or [User] that appears on the Home
screen and the screen displayed during scanning.
Count Only Mode
Shortcut
Sets whether Count Only Mode (page 61) can be activated by holding the
Menu button (
) for 1 second or more.
*1
Key buzzers, error buzzers etc.
5.3.3.2 Counter
screen
Select the counter using
or of the cursor button, and press the Enter button ( ) to complete your
selection. The types of selectable counters are shown below
.
Setting contents
Items Contents
Scan Counter The number of documents scanned during the scanning process. The scanned
quantity is cleared each time you start scanning.
User Counter The number of documents scanned until the counter is cleared by the user.
System Counter The number of documents scanned by the scanner since it was shipped from
the factory
.
After Clean Roller
Counter
The number of documents scanned since clearing the counter after cleaning
the rollers. Clear after cleaning the rollers.
After Replace Roller
Counter
The number of documents scanned since clearing the counter after replacing
the rollers. Clear after replacing the rollers.
Clear User Counter Sets the User Counter to zero (0).
5.3.3 Menu screen
30
To Next Page
Loading...
