7.3.2.1 Performing push scan
For details about operation panel, refer to "
5 Operation Panel" (page 20).
Note
• Register jobs in advance. For details about registering jobs, refer to the Image Capture Plus help.
1. Press the job button (
).
2. Use
or of the cursor button to select a group.
3. Use or of the cursor button to select a job.
4. Press the Enter button ( ) to complete the job selection.
5. Place the documents on the feed tray
.
• When [Touch Free Scanning] is selected, scanning will start.
• When [Single Touch Scanning] is selected, press the Start/Stop button (
) to start scanning.
7.3.2 Selecting the behavior of push scan
59
To Next Page
Loading...
