Panasonic KV-S8147 - Install the Imprinter as the Post-Imprinter

10.1.2 Install the imprinter as the post-imprinter
1. T
urn OFF the unit's power (page 33).
2. Open the post-imprinter door (page 38).
3. Connect the cable.
Notice
• Check the orientation of the connector before insertion.
4. After aligning the pins ( ) on both sides with the slits in the body of the scanner ( ), insert the pins ( )
until they are immobilized by the springs ( ).
1
3
4
2
5. Install the ink cartridge (page
90).
10.1.2 Install the imprinter as the post-imprinter
86