11.2 Error Messages
Error codes and simple messages describing the scanner's condition are displayed on the LCD. For details
about the error codes and messages, check in User Utility
.
Error Code Cause Remedy
U11
The paper has jammed in the feed
tray area.
Open the ADF door, and remove the
paper
.
The sensors are dirty. Clean the sensors.
U12
U13
U14
U15
U16
A paper jam has occurred in the unit.
Open the ADF door, and remove the
paper
.
The sensors are dirty. Clean the sensors.
U18
Paper has been left in the scanner.
Open the ADF door, and remove all the
paper left inside.
The sensors are dirty. Clean the sensors.
U19
A stapled or damaged document has
been detected.
Open the ADF door, and remove all the
paper left inside.
U23 A double-feed error has occurred.
Open the ADF door, and remove the
jammed paper
.
U25
U26
A stapled document has been
detected.
Open the ADF door, and remove all the
paper left inside.
U28 The feed tray is full.
Remove the documents from the tray,
open the ADF door
, and then close it.
U30 The ADF door is open. Close the ADF door.
U32
U34
The Imprinter door is open. Close the Imprinter door.
Fxx A system error has occurred. Contact your dealer.
11.2 Error Messages
98
To Next Page
Loading...
