5.1 About LED
Ready LED (Green) Status
OFF
Power OFF
*1
Error
*2
ON
Ready mode or Scanning
Notification mode
Blinking (Slow) Sleep mode
*3
or Cleaning mode
Blinking (Fast) Warming up
Blinking (Fast, 2 times consecutively)
Double Feed Skip mode
Dog-ear Detection Skip mode
Exit tray full
*1
If the power of
f feature in sleep mode is enabled, and if no operation is performed for a certain period of time, the scanner will be
turned off automatically. Press the power button (
) of the scanner to turn it on. You can enable/disable the power off feature, and
change the time until the scanner turns of
f in User Utility.
*2
For details about the error, refer to "11.2 Error Messages" (page 98) or check in User Utility.
*3
If no operation is performed for 15 minutes or longer, the scanner will enter sleep mode automatically to conserve energy. Press
any button (except the power button) on the scanner’s operation panel to return to ready mode. The time until the scanner enters
sleep mode can be changed in User Utility.
Manual feed LED (Green) Status
OFF Automatic feeding
ON Manual feeding
5.1 About LED
22
To Next Page
Loading...
