Panasonic KV-S8147 - Clearing the Counter after Replacing the Rollers

9.3.1 Clearing the Counter After Replacing the Rollers
After replacing the rollers, set the After Replace Roller Counter to zero (0) from the operation panel (
page
20).
1. Press the menu button (
).
2. Use
or of the cursor button to select "Counter".
3. Press the Enter button ( ) to complete your selection.
4. Use or of the cursor button to select "Clear Replace Roller Counter".
5. Press the Enter button (
) to complete your selection.
Note
• The After Replace Roller Counter
can also be cleared from User Utility. For details, refer to the User
Utility help.
9.3.1 Clearing the Counter After Replacing the Rollers
82