6. Remove the document, and then slide the document guides selector in the direction shown in the
illustration until the ◄ ( ) and ● ( ) marks are aligned.
7. Place the document on the feed tray again and adjust the document guide according to the size of the
document to be scanned.
Notice
• Make sure to align the document pages along one side.
• Make sure that the center of the smallest sheet of the document will be fed to the center of the
paper slot.
• T
o secure the document guides, lower the document guide lock.
7.2.5 When Scanning Documents with Pages of Different Sizes at One Time
54
To Next Page
Loading...
