Panasonic KX-NT400

Feature Operation
Walking Extension
You can exchange the settings set at another
extension with your own settings.
Notice
• After you have exchanged the settings
between extensions, the KX-NT400 must
be restarted for the change to take effect.
See "Manual Restarting (System Reset)
(Page 168)".
+ your extension no. + extension PIN
*1
Depending on your settings, how you access this screen will differ.
• If the Calls screen is set to Line Buttons mode:
→ Press the Calls tab.
• If the Calls screen is set to Call List mode:
→ Press + Feature.
For details about the Calls screen, see "Calls Screen (Page 37)".
Document Version 2010-01 Operating Instructions 107
PBX Feature List